Porter-Cable CFFC350C Bedienungsanleitung PDF herunterladen (Seite 13)

13 - ENG

A09770

Before Each Start-Up:

1. Place On/Auto/Off lever to "Off".

2. Turn the regulator knob counter-

clockwise to set the outlet

pressure to zero.

3. Attach hose and accessories.

NOTE: The hose or accessory will

require a quick connect plug if the

air outlet is equipped with a quick

connect socket.

Risk of Bursting.

Too much air

pressure causes a hazardous

risk of bursting. Check the

manufacturer’s maximum pressure

rating for air tools and accessories.

The regulator outlet pressure

must never exceed the maximum

pressure rating.

MAINTENANCE

Customer Responsibilities

Daily

or after

each

use

Before

each

use

●

●

Every

100

hours

Yearly

●

1

1- more frequent in dusty or humid conditions

Check Safety Valve

Drain Tank

Air Filter

To ensure efficient operation and

longer life of the air compressor,

a routine maintenance schedule

Air compressor pump intake

and exhaust valves

●

Risk of Unsafe

Operation. Unit

cycles automatically when power

is on. When servicing, you may

be exposed to voltage sources,

compressed air, or moving parts.

Before servicing unit unplug or

disconnect electrical supply to

the air compressor, bleed tank

of pressure, and allow the air

compressor to cool.

should be prepared and followed. The

above routine maintenance schedule

is geared to an air compressor in a

normal working environment operating

on a daily basis. If necessary, the

schedule should be modified to

suit the conditions under which

your air compressor is used. The

modifications will depend upon

the hours of operation and the

working environment. Compressors

in an extremely dirty and/or hostile

environment will require a greater

frequency of all maintenance checks.

How to Start:

1. Turn the On/Auto/Off lever to "On/

Auto" and allow tank pressure

to build. Motor will stop when

tank pressure reaches "cut-out"

pressure.

2. Turn regulator knob clockwise to

increase pressure and stop when

desired pressure is reached.

The compressor is ready for use.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 21 22

Kommentare zu diesen Handbüchern

Keine Kommentare