Porter-Cable CFFC350C Bedienungsanleitung PDF herunterladen (Seite 11)

11 - ENG

A09770

OPERATION

Know Your Air Compressor

READ THIS OWNER’S MANUAL AND SAFETY RULES BEFORE OPERATING

YOUR UNIT. Compare the illustrations with your unit to familiarize yourself with the

location of various controls and adjustments. Save this manual for future reference.

Tank Pressure Gauge

Pressure

Switch

Outlet Pressure Gauge

Quick

Connect

Regulator

Safety Valve

On/

Auto/

Off

Switch

Regulator: Controls the air

pressure shown on the outlet

pressure gauge. Turn regulator knob

clockwise to increase pressure

and counterclockwise to decrease

pressure.

Quick Connect Body: The quick

connect body accepts Industrial quick

connect plugs to make connections

simple and easy.

Cooling System (not shown): This

compressor contains an advanced

design cooling system. At the heart of

this cooling system is an engineered

fan. It is perfectly normal for this fan

to blow air through the vent holes

in large amounts. You know that the

cooling system is working when air is

being expelled.

Air Compressor Pump (not shown):

Compresses air into the air tank.

Working air is not available until the

compressor has raised the air tank

pressure above that required at the

air outlet.

Description of Operation

Become familiar with these controls

before operating the unit.

On/Auto/Off Switch: Turn this switch

"On/Auto" to provide automatic power

to the pressure switch and "Off" to

remove power at the end of each use.

Pressure Switch: The pressure

switch automatically starts the

motor when the air tank pressure

drops below the factory set "cut-in"

pressure. It stops the motor when the

air tank pressure reaches the factory

set "cut-out" pressure.

Safety Valve: If the pressure switch

does not shut Off the air compressor

at its "cut-out" pressure setting, the

safety valve will protect against high

pressure by "popping out" at its factory

set pressure (slightly higher than the

pressure switch "cut-out" setting).

Tank Pressure Gauge: The tank

pressure gauge indicates the reserve

air pressure in the tank.

Outlet Pressure Gauge: The outlet

pressure gauge indicates the air

pressure available at the outlet side of

the regulator. This pressure is controlled

by the regulator and is always less than

or equal to the tank pressure.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 21 22

Kommentare zu diesen Handbüchern

Keine Kommentare

Porter-Cable CFFC350C Bedienungsanleitung Seite 11

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Luftkompressoren Porter-Cable CFFC350C