Porter-Cable NS100A Bedienungsanleitung PDF herunterladen (Seite 9)

CLEARING A JAMMED FASTENER

1. CAUTION: Disconnect tool from air supply.

2. Open magazine and remove any remaining fasteners.

CAUTION: Remove fasteners from tool before opening the fastener

guide plate. Fasteners are under pressure and may shoot out of

magazine which could cause injury.

3. Depress the quick release latch and open the fastener guide plate (see

Fig. 20).

4. Remove the jammed fastener (see Fig. 21).

5. Depress the quick release latch, close the fastener guide plate, and

release the latch.

NOSE CUSHION

This tool is equipped with a rubber

nose cushion (A) Fig. 22, that prevents

marring of finished surfaces by the

metal safety during normal operation.

The nose cushion can be removed

and stored in the rear area of the tool

(B) Fig. 22, when it is not required.

CAUTION: Disconnect tool from

air supply before removing or

reinstalling rubber nose cushion.

MAINTENANCE

CLEAN AND INSPECT DAILY

CAUTION: Disconnect tool from air supply before cleaning and

inspection.Correct all problems before placing the tool back in use.

Wipe tool clean and inspect for wear or damage. Use non-flammable cleaning

solutions to wipe exterior of tool only if necessary. DO NOT SOAK tool with

cleaning solutions. Such solutions can damage internal parts.

Inspect trigger and safety mechanism to assure system is complete and

functional: no loose or missing parts, no binding or sticking parts.

Keep all screws tight. Loose screws can cause personal injury or damage

tool.

Fig. 20

Fig. 21

Fig. 22

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 36 37

Keine Kommentare

Porter-Cable NS100A Bedienungsanleitung Seite 9