Porter-cable PC2525SP Bedienungsanleitung PDF herunterladen (Seite 16)

16- ENG

D25115

2. Disconnect spark plug wire.

3. Pull trigger on gun handle to

relieve any water pressure.

4. Disconnect the wand from the

gun.

5. Remove the high-pressure nozzle

from the wand. Remove any

obstructions with the nozzle

cleaning tool provided and back-

flush with clean water.

6. Direct water supply into nozzle

end to backflush loosened parti-

cles for 30 seconds.

7. Reassemble the nozzle to the

wand.

8. Reconnect wand to gun and turn

on water supply.

9. Start pressure washer and place

wand into high pressure setting to

test.

WAND

If the nozzle becomes clogged with

foreign materials, such as dirt, exces-

sive pressure may develop. If the

nozzle becomes partially clogged or

restricted, the pump pressure will pul-

sate. Clean the nozzle immediately

using the nozzle kit supplied and the

following instructions:

1. Shut off the pressure washer and

turn off the water supply.

PUMP

This screen filter should be checked

periodically and cleaned if necessary.

1. Remove filter by grasping end

and removing it from water inlet

of pump as shown.

2. Clean filter by flushing it with

water on both sides.

3. Install filter into water inlet of

pump

Filter Screen

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22

Kommentare zu diesen Handbüchern

Keine Kommentare